The Makita DLX2268TJ Twin Pack contains the following:
1 x 18V DHR242 SDS Plus Hammer Drill has an efficient brushless DC motor that provides higher productivity and a slide chuck for quick easy SDS Plus bit changes. It offers 3 modes of operation: rotation + hammering, hammering only and rotation only. The unique joint construction suppresses the transmission of vibration to the battery terminals minimising battery failures.
No Load Speed: 0-950/min.
Impact Rate: 0-4,700/bpm
Impact Energy: 2 joules
Capacity: Concrete 24mm, Steel 13mm, Wood 27mm
1 x 18V DTW285 LTX Impact Wrench has a brushless motor and a reverse rotation auto-stop mode. This mode works only with pulling the trigger fully in counter-clockwise rotation. When the bolt/nut gets loosened enough, the tool stops the impact and rotation in 0.2 seconds. It also offers variable speed control via a trigger, with both forward and reverse rotation. For added safety, there is an electric brake. This machine has three power settings.
Bit Holder: 1/2in Square
No Load Speed: 0-1,600/2,100/2,800/min.
Impact Rate: 0-1,800/0-2,600/0-3,500/bpm
Max. Fastening Torque: 280Nm
Max. Nut Busting Torque: 400Nm
Bolt Capacity: Standard Bolt M10-M20, High Tensile Bolt M10-M16
Weight: 1.7kg
Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x 18V DC18RC Compact Charger and 1 x Type 3 MAKPAC Connector Case.