The Makita HR4003C Rotary Demolition Hammer in the 240V Version.
Supplied with:
1 x Side Handle.
1 x Depth Stop.
1 x Bit Grease.
1 x Carry Case.
The Makita HR4003C Rotary Demolition Hammer has been developed to provide higher operating efficiency and more comfort with unrivalled low level of vibration. With both constant and variable speed control for increased control, even in demanding applications. The torque limiter increases user safety.
It offers 2-modes of operation: rotation with hammering and hammer only. The easy-to-use operation-mode change lever is located on the top of the motor housing for reduced possibility of breakage. In hammering mode, the on/off switch is switchable between two switches to meet your application: for Continuous or Intermittent chiselling applications.
Fitted with a one-touch sliding chuck for easy bit installation and removal. Adapted for SDS Max bits. There is also an LED service light indicating when to replace the carbon brush.
Supplied with: 1 x Side Handle, 1 x Depth Stop, 1 x Bit Grease and 1 x Carry Case.
Specifications:
Tool Holder: SDS Max.
Input Power: 1,100W.
No Load Speed: 250-500/min.
Impact Rate: 1,450-2,900/bpm.
Impact Energy: 8.3 joules.
Max. Drilling Capacity: Concrete 40mm.
Optimum Drilling Range: 16-35mm.
Max. Core Diameter (TCT): 105mm.
Weight: 6.2kg.